Office & swivel chairs
Match the seat-mechanism socket, base taper and installed seat-height range.
← All furniture applicationsFURNITURE COMPONENT SUPPLY
Chair gas lifts for office chairs & stools
Match a chair gas-lift column by its complete dimensions, taper interfaces and release geometry. Compare published column references for swivel chairs and seating, then send the part code and quantity.
Matching product family: Chair gas-lift columns →
WHERE IT WORKS
Vertically between the chair base and the seat mechanism.
Provides controlled seat-height adjustment through the release button and seat lever. It is a dedicated column, not an ordinary eye-to-eye lid support.
Work chairs & stools
Different column heights and adjustment ranges need their own matching dimensions.
Replacement columns
Identify the complete column; a similar tube diameter alone does not confirm fit.
SEND THE RIGHT INFORMATION
A useful parts list starts here.
Use the original marking or a drawing wherever possible. Measurements may be supplied in millimeters or inches.
Column reference
Original code, complete column photo and the source drawing if available.
Column geometry
Extended length L, outer tube length B, taper position C and both tube diameters.
Seat-height range
Required adjustment and installed seat height; do not equate travel with total chair height.
Interfaces & quantity
Seat/base taper details, release button/lever interface and order quantity.
A published spring extension force is not an occupant weight rating. Column stroke and the source seat-adjustment range can also differ.
PUBLISHED MATCHING REFERENCES
12 references for this application.
Choose a reference and include your quantity. Each record keeps its original dimensional scope and a link to the source.
Find the reference you needChoose a filter or enter a complete part number.
Published application references help identify your request. They are not Horizon stock codes. Confirm the exact assembly, fittings and quantity in your quotation. Unpublished specifications are left open for matching.
Stabilus 086772
STAB-O-MAT chair column 086772
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 395.5 mm / 15.57 in
Stroke: 132.5 mm / 5.22 in
Max. stroke: 132.5 mm / 5.22 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 94 mm / 3.70 in; Standpipe length B: 220 mm / 8.66 in; Seat adjustment range: 120 mm / 4.72 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 169–301.5 mm / 6.65–11.87 in
Spring extension force is not an occupant weight rating.
Stabilus 087967
STAB-O-MAT chair column 087967
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 395.5 mm / 15.57 in
Stroke: 132.5 mm / 5.22 in
Max. stroke: 132.5 mm / 5.22 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 104 mm / 4.09 in; Standpipe length B: 220 mm / 8.66 in; Seat adjustment range: 120 mm / 4.72 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 159–291.5 mm / 6.26–11.48 in
Spring extension force is not an occupant weight rating.
Stabilus 088923
STAB-O-MAT chair column 088923
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 395.5 mm / 15.57 in
Stroke: 132.5 mm / 5.22 in
Max. stroke: 132.5 mm / 5.22 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 114 mm / 4.49 in; Standpipe length B: 220 mm / 8.66 in; Seat adjustment range: 120 mm / 4.72 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 149–281.5 mm / 5.87–11.08 in
Spring extension force is not an occupant weight rating.
Stabilus 091552
STAB-O-MAT chair column 091552
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 395.5 mm / 15.57 in
Stroke: 132.5 mm / 5.22 in
Max. stroke: 132.5 mm / 5.22 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 124 mm / 4.88 in; Standpipe length B: 220 mm / 8.66 in; Seat adjustment range: 120 mm / 4.72 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 139–271.5 mm / 5.47–10.69 in
Spring extension force is not an occupant weight rating.
Stabilus 093703
STAB-O-MAT chair column 093703
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 395.5 mm / 15.57 in
Stroke: 132.5 mm / 5.22 in
Max. stroke: 132.5 mm / 5.22 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 164 mm / 6.46 in; Standpipe length B: 220 mm / 8.66 in; Seat adjustment range: 120 mm / 4.72 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 99–231.5 mm / 3.90–9.11 in
Spring extension force is not an occupant weight rating.
Stabilus 097766
STAB-O-MAT chair column 097766
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 354.5 mm / 13.96 in
Stroke: 111.5 mm / 4.39 in
Max. stroke: 111.5 mm / 4.39 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 76 mm / 2.99 in; Standpipe length B: 200 mm / 7.87 in; Seat adjustment range: 100 mm / 3.94 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 167–278.5 mm / 6.57–10.96 in
Spring extension force is not an occupant weight rating.
Stabilus 101829
STAB-O-MAT chair column 101829
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 354.5 mm / 13.96 in
Stroke: 111.5 mm / 4.39 in
Max. stroke: 111.5 mm / 4.39 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 100 mm / 3.94 in; Standpipe length B: 200 mm / 7.87 in; Seat adjustment range: 100 mm / 3.94 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 143–254.5 mm / 5.63–10.02 in
Spring extension force is not an occupant weight rating.
Stabilus 103263
STAB-O-MAT chair column 103263
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 354.5 mm / 13.96 in
Stroke: 111.5 mm / 4.39 in
Max. stroke: 111.5 mm / 4.39 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 110 mm / 4.33 in; Standpipe length B: 200 mm / 7.87 in; Seat adjustment range: 100 mm / 3.94 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 133–244.5 mm / 5.24–9.63 in
Spring extension force is not an occupant weight rating.
Stabilus 100634
STAB-O-MAT chair column 100634
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 354.5 mm / 13.96 in
Stroke: 111.5 mm / 4.39 in
Max. stroke: 111.5 mm / 4.39 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 126 mm / 4.96 in; Standpipe length B: 200 mm / 7.87 in; Seat adjustment range: 100 mm / 3.94 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 117–228.5 mm / 4.61–9.00 in
Spring extension force is not an occupant weight rating.
Stabilus 092747
STAB-O-MAT chair column 092747
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 313.5 mm / 12.34 in
Stroke: 90.5 mm / 3.56 in
Max. stroke: 90.5 mm / 3.56 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 76 mm / 2.99 in; Standpipe length B: 174 mm / 6.85 in; Seat adjustment range: 80 mm / 3.15 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 147–237.5 mm / 5.79–9.35 in
Spring extension force is not an occupant weight rating.
Stabilus 094898
STAB-O-MAT chair column 094898
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 313.5 mm / 12.34 in
Stroke: 90.5 mm / 3.56 in
Max. stroke: 90.5 mm / 3.56 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 96 mm / 3.78 in; Standpipe length B: 174 mm / 6.85 in; Seat adjustment range: 80 mm / 3.15 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 127–217.5 mm / 5.00–8.56 in
Spring extension force is not an occupant weight rating.
Stabilus 096332
STAB-O-MAT chair column 096332
Match full column, taper position, seat/base interfaces and release mechanism; stroke differs from the published seat adjustment range.
Published specifications
Complete chair gas-lift column
Drawing length L: 313.5 mm / 12.34 in
Stroke: 90.5 mm / 3.56 in
Max. stroke: 90.5 mm / 3.56 in
Spring extension force: 350 N / ≈78.7 lbf
Source column drawing L, not eye-to-eye strut length
Chair seat/base taper interfaces; taper position C is part-specific
Taper position C: 104 mm / 4.09 in; Standpipe length B: 174 mm / 6.85 in; Seat adjustment range: 80 mm / 3.15 in; Outer tube diameter: 50 mm / 1.97 in; Pressure tube diameter: 28 mm / 1.10 in; Drawing dimension A: 119–209.5 mm / 4.69–8.25 in
Spring extension force is not an occupant weight rating.
No matching reference is listed. Send the complete marking, photos and quantity →
FROM IDENTIFICATION TO SUPPLY
Request a quotation Keep the specification with every order.
Reference and quantity → matched dimensions, fittings and release arrangement → agreed specification for the quotation and repeat order.
BROWSE OTHER APPLICATIONS
All furniture categories →Different furniture. Different mechanisms.
Cabinet doors & flaps
Upward-opening kitchen, overhead and storage-cabinet flaps.
Find the right support ↗
Storage & ottoman beds
Lift-up bed bases with accessible storage beneath the mattress.
Find the right support ↗
Wall & foldaway beds
Vertical and horizontal foldaway-bed mechanisms.
Find the right support ↗
Lift-top & adjustable tables
Swing-up coffee-table tops and controlled table-height adjustment.
Find the right support ↗
Recliners & sofa adjustment
Controlled backrest and armrest adjustment in seating mechanisms.
Find the right support ↗Application reading: SUSPA furniture applications · Stabilus home furniture applications · Stabilus office furniture applications. Manufacturer examples explain functions; they do not establish Horizon compatibility or certification.